TRENDnet User's Guide
Events
Motion Detection
Set up how the motion detection event will be triggered and what actions will be
triggered.
Note: This feature is camera dependent.
Camera: Select the camera you want to configure
Enable Check this box to enable motion detection. Click
© Copyright 2016 TRENDnet. All Rights Reserved.
Motion
Save to save the choice.
Detection:
Draw Area: Click Draw Area button to start drawing. Click and
drag on the area you want to set up the motion
detection. The number of areas you can set up
depends on camera models. Click Stop Drawing to
stop drawing motion detection areas.
The red grids represent the motion detection area,
by default, the entire area is selected. Click Clear All
to erase the area to restart.
Sensitivity: Move the slider to adjust detection sensitivity.
Clear All: Click this button to clear all the set up areas.
NVR / TV‐NVR2216 / TV‐NVR2432
96