Table of Contents
Advertisement
TRENDnet User's Guide
Logout, start up, or shut down the NVR
The NVR is a class A network equipment designed for 24/7 operation. Just plug‐in
the power source, the NVR is up and running. When you want to change the NVR
settings, manage the cameras proceed system maintenance or software upgrade,
you need to log in, log out, restart, or shut down your NVR gently.
Pulling out the power source may cause unexpected hard drive damage and system
malfunction which is not a suggested way to power down your NVR.
Startup your NVR
Make sure the power supply is plugged into an electrical outlet. It is highly
recommended that an uninterruptible power supply (UPS) to be used in
conjunction with the unit.
Shutdown your NVR
Bring up the main menu. Click on Shutdown Menu
menu is showing up.
Click Shutdown
to gracefully end the recording sessions and prepare the hard
drive for shutting down. Then click the Yes to confirm that you want to shut down
the NVR.
© Copyright 2016 TRENDnet. All Rights Reserved.
icon. The Shutdown sub
Rebooting your NVR
Click Reboot
to reboot your NVR without power down.
Log out from NVR management
When you have done the NVR settings and managements, you'll want to lock your
NVR before you leave. Click Logout
Note: You can also set automatic time out. The default setting is 5 minutes without
management interaction.
NVR / TV‐NVR2216 / TV‐NVR2432
to exit the NVR management.
21
Hide quick links:
Advertisement
Table of Contents
