Logging-In To The Camera For The First Time (Os X) - TRENDnet TV-NVR2208 User Manual

TRENDnet User's Guide
11. The Live View page will show up and begin streaming video.
Note: If you were not go through the basic setup, the camera plug‐and‐play process
will begin after you setup the password. Wait a few minutes and press F5 to refresh
the browser for the live video.
© Copyright 2016 TRENDnet. All Rights Reserved.
Logging‐in to the Camera for the First Time (OS X)
1. Open the web browser on your computer. In the address bar, enter the IP
address of the camera 192.168.10.60. (If you have a DHCP server on your
network, the IP address will be assigned dynamically. For example, if you have
a home gateway on your network and you plug‐in the camera on the same
network, then you can find the camera IP address on your home gateway), and
then press Enter.
2. Enter the user name, admin, and the default password, admin, and then click
OK.
NVR / TV‐NVR2216 / TV‐NVR2432
73