TRENDnet User's Guide
To remove a camera from the display, just click
the selected cell
number.
To assign a channel to a display cell, choose the camera
from the camera list.
Note: Each video channel can be assigned to one display
cell. Click on camera when it is not assigned
double click on the list if it is currently assigned
other display cell.
Missing Video: If you assign a channel to a display cell
and there's no video stream, the cell is showing
TRENDnet. To remove the TRENDNet message, just
remove the channel assignment on the display cell.
Control Panel:
: Single channel display
: Quad channel display
: Automatic channel assignment
: Remove all channel assignments
: Previous page
: Next Page
: Current page / Total page
Note: In single channel display, you can set up the
display sequence with the page numbers.
Click Apply to apply the changes.
© Copyright 2016 TRENDnet. All Rights Reserved.
on
to remove the channel
Channel‐Zero Encoding
Setting camera to certain frame rate and bit rates.
and
to
NVR / TV‐NVR2216 / TV‐NVR2432
43