Logging-In To The Nvr For The First Time (Windows); System Requirement - TRENDnet TV-NVR2208 User Manual

TRENDnet User's Guide
System Requirement
To access you NVR with the browser, you need a Windows or OS X based computer
and up‐to‐date browser (Internet Explorer, Safari, or Firefox). A web browser plug‐
in must be installed to supported computer and browser to watch the video.
You need to setup the IP address in the same network of NVR. (192.168.10.x
network or your home network). For example, setup your computer with
192.168.10.2 static IP address.
For Windows system, please go to the next paragraph.
For OS X system, please go directly to page 74.
Logging‐in to the NVR for the First Time (Windows)
1. Open a browser and type in the NVR's IP address. (default 192.168.10.60 if
the NVR is not connected to a network)
2. Enter the user name, admin, and the password you setup through the
basic setup. If you didn't setup your password, the change password
window will pop up on step 9 to guide you through the password changing.
The default password is admin.
© Copyright 2016 TRENDnet. All Rights Reserved.
3. The NVR management page will detect if you installed the camera video
streaming plug‐in or not. Click the link to download the plug‐in from NVR.
4. Click on Run to install the web plug‐in for the cameras.
5. Permission request may show up depends on the Internet security settings
on your computer. Click More Info and then Run anyway to install the
plug‐ in.
NVR / TV‐NVR2216 / TV‐NVR2432
71