TRENDnet User's Guide
Factory Default
To reset your NVR to the factory default, navigate to this Default page and then
click on OK to reset all NVR settings back to factory default.
© Copyright 2016 TRENDnet. All Rights Reserved.
Network Monitoring
Traffic
To monitor the network traffic, navigate to the traffic chart.
LAN1: The network interface.
Sending: The network traffic generated from the NVR.
Receiving: The network traffic receiving by the NVR.
Link Status: The network linking status.
Type: Type of network, Ethernet.
MAC Address: Media Access Address of the network interface.
MTU: Maximum Transmission Unit in bytes.
NIC Type: Type of the network card. Speed and duplexing.
NVR / TV‐NVR2216 / TV‐NVR2432
Traffic
53