Adjusting The Engine Idling Speed - Yamaha BANSHEE 350 YFZ350Z Owner's Manual

1
1. Adjusting nut
2. Locknut
5. Move the throttle lever a few times and re-
check the position.
6. Install the fuel tank, side cover, radiator cover
and air filter case cover.
7. Connect the fuel hoses.
8. Install the seat.
EBU24020

Adjusting the engine idling speed

The engine idling speed must be checked and, if
necessary, adjusted as follows at the intervals
specified in the periodic maintenance and lubrica-
tion chart.
TIP
G
A diagnostic tachometer is needed to make this
adjustment.
G The carburetor synchronization and the throttle
2
cable free play must be checked, and adjusted if
necessary, before adjusting the engine idling
speed.
1. Start the engine and warm it up.
TIP
The engine is warm when it quickly responds to the
throttle.
2. Attach the tachometer to the spark plug lead.
3. Turn in both pilot air screws until they lightly
seat.
4. Turn out both pilot air screws to specification.
(See the "Changing the carburetor settings"
section on the page 8-23.)
8-31
1
2
3
4
5
6
7
8
9
10
11