Yamaha BANSHEE 350 YFZ350Z Owner's Manual page 98

1
2
3
2
1
4
5
6
1. Sponge material
2. Air filter element frame
7
3. Air filter element lock plate
8
6. Wash the sponge material gently but thor-
oughly in solvent. WARNING! Always use
9
parts cleaning solvent to clean the sponge
material. Never use low-flash-point sol-
10
vents or gasoline to clean the sponge ma-
terial because the engine could catch fire
11
or explode.
[EWB01941]
7. Squeeze the excess solvent out of the sponge
material and let it dry. NOTICE: Do not twist
the sponge material when squeezing
it.
[ECB00441]
2
1
3
8. Check the sponge material and replace it if
damaged.
9. Apply Yamaha foam air filter oil or other qual-
ity foam air filter oil to the sponge material.
TIP
The sponge material should be wet but not drip-
ping.
10. Pull the sponge material over the air filter ele-
ment frame, and then install the lock plate by
turning it.
8-20