Yamaha BANSHEE 350 YFZ350Z Owner's Manual page 117

1. Locknut
2. Adjusting bolt
3. Loosen the locknut and the adjusting bolt at
the rear brake caliper.
1 2
(a)
(b)
1. Adjusting bolt
2. Locknut
4. Turn the adjusting bolt at the clutch lever in di-
TIP
If the cable length cannot be adjusted to specifica-
tion, consult a Yamaha dealer.
5. Tighten the locknut at the clutch lever.
6. Turn in the adjusting bolt at the rear brake cal-
8-39
1
2
rection (a) to increase the cable length, and in
direction (b) to decrease it.
iper by hand until it feels tight, then turn it out
1/8 turn and tighten its locknut to the specified
torque. NOTICE: When tightening the lock-
1
2
3
4
5
6
7
8
9
10
11