Yamaha BANSHEE 350 YFZ350Z Owner's Manual page 89

Table of Contents

Advertisement

fore each ride. In addition, the transmission oil
must be changed at the intervals specified in the
periodic maintenance and lubrication chart.
To check the transmission oil level
1. Place the ATV on a level surface.
2. Start the engine, warm it up for several min-
utes, and then turn it off.
3. Wait a few minutes until the oil settles, remove
the oil filler cap, wipe the dipstick off with a
clean rag, insert it back into the oil filler hole
(without screwing it in), and then remove it
again to check the oil level.
4
1
1. Dipstick
2. Maximum level mark
3. Minimum level mark
4. Transmission oil filler cap
TIP
The transmission oil should be between the mini-
mum and maximum level marks.
4. If the oil is at or below the minimum level mark,
add sufficient oil of the recommended type to
raise it to the correct level.
5. Insert the dipstick into the oil filler hole, and
then tighten the oil filler cap.
8-11
1
2
3
2
3
4
5
6
7
8
9
10
11

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents