Tilt Support Knob; Tilt Support Bar; Cowling Lock Lever(S) (Turn Type) - Yamaha F25D Owner's Manual

Components
1. Tilt lock lever
To tilt the outboard motor up, set the tilt lock
lever to the " " (up) position. To tilt the out-
board motor down, set the tilt lock lever to the
" " (down) position.
EMU26322

Tilt support knob

To keep the outboard motor in the tilted up
position, push the tilt support knob under the
swivel bracket.
ECM00661
NOTICE
Do not use the tilt support lever or knob
when trailering the boat. The outboard
motor could shake loose from the tilt sup-
port and fall. If the motor cannot be
trailered in the normal running position,
use an additional support device to se-
cure it in the tilt position.
26
EMU26334

Tilt support bar

The tilt support bar keeps the outboard motor
in the tilted up position.
1
ZMU06500
ECM01661
NOTICE
Do not use the tilt support bar when
trailering the boat. The outboard motor
could shake loose from the tilt support
and fall. If the motor cannot be trailered in
the normal running position, use an addi-
tional support device to secure it in the
tilt position.
EMU26374

Cowling lock lever(s) (turn type)

To remove the engine top cowling, turn the
cowling lock lever(s) and lift off the cowling.
When installing the cowling, check to be sure
it fits properly in the rubber seal. Then lock
the cowling again by returning the cowling
ZMU06543
lock lever(s) to the lock position.
ZMU06503