Engine Shut-Off Cord (Lanyard); Engine Oil - Yamaha F25D Owner's Manual

Hide thumbs Also See for F25D:
Table of Contents

Advertisement

Operation
turns smoothly and that it completely re-
turns to the fully closed position.
Look for loose or damaged connections of
the throttle cable and shift link.
Remote control models:
Turn the steering wheel full-right and full-
left. Make sure operation is smooth and
unrestricted throughout the whole range
with no binding or excessive free play.
Operate the throttle levers several times to
make sure there is no hesitation in their
travel. Operation should be smooth over
the complete range of motion, and each le-
ver should return completely to the idle po-
sition.
Look for loose or damaged connections of
the throttle and shift cables.
EMU36484

Engine shut-off cord (lanyard)

Inspect the engine shut-off cord and clip for
damage, such as cuts, breaks, and wear.
36
1. Cord
2. Clip
3. Engine shut-off switch
1. Cord
2. Clip
ZMU06590
3. Engine shut-off switch
EMU40994

Engine oil

1.
Place the outboard motor in a vertical
position (not tilted). NOTICE: If the out-
board motor is not level, the oil level
indicated on the oil dipstick may not
be accurate.
2.
Remove the oil dipstick and wipe it
clean.
ZMU06589
3
2
1
ZMU02003
[ECM01862]

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Ft25fF20d

Table of Contents