Garmin GTX330 Installation Manual page 57

7. Press the CRSR key to select the next numeric entry field. Enter the next character as stated in
the previous step, then move onto the next one, repeating the process until the complete number is
entered.
8. When finished, press the CRSR key to accept the number entry.
9. Using the FUNC and/or START/STOP keys, toggle through the pages to get off of, then back
onto the aircraft address page. Verify that the address is correct.
The unit now contains a Mode S address and may be turned off. To power the unit on in the normal
mode, press only the ON, ALT, or STBY key (without holding the FUNC key) or turn on with the
avionics master switch.
MODE S ADDRESS, AIRCRAFT REGISTRATION PAGE
SELECTION
US TAIL #
HEX
5.2.13.2 MODE S Flight ID Pages
Flight ID can be entered in TSO Class 2A units, P/N 010-00230-( ) and 010-00293-( ).
When a Flight ID Number contains a space, the GTX 330 automatically
removes spaces in data transmission.
For operation requiring the flight crew to enter an aircraft identification designator each time the unit is
powered up, select the page identified as FLIGHT ID PWR-UP ENTRY. When this choice is selected
and the crew enters the Flight ID correctly, the flight number call sign for radio contact with ATC is the
same flight identification that the GTX 330 Mode S transponder replies to ATC radar interrogations.
SELECTION
SAME AS TAIL
POWER UP ENTRY
CONFIG ENTRY
The screen depicted here shows the FLIGHT ID PWR-UP ENTRY (choice 2) after the CRSR key is
pressed, and the unit is ready to receive the flight identification.
For entering all Mode S Flight IDs:
1. Press the CRSR key once to highlight the address field.
2. Enter the aircraft address using the number keys. Pressing a key repeatedly scrolls through the
digit/alpha characters for that key.
3. Press the CRSR key to select the next alphanumeric entry field. Enter the next character as stated
in the previous step, then move onto the next one, repeating the process until the complete
number is entered.
4. When finished, press the CRSR key to accept the number entry.
GTX 330/GTX 330D Installation Manual
190-00207-02
DESCRIPTION
N-Registration Number
Hexadecimal code address
NOTE
DESCRIPTION
If address is a US registration number, FLT ID can be the same.
Enter FLT ID every time the unit is turned on in normal mode.
Enter FLT ID in Configuration mode only.
FLIGHT ID PWR-UP ENTRY Page
Page 5-17
Revision R