Garmin GTX330 Installation Manual page 51

Hide thumbs Also See for GTX330:
Table of Contents

Advertisement

5.2.7 Contrast Configuration Page
CONTRAST MODE
SELECTION
AUTO (Automatic)
MAN (Manual)
CONTRAST LEVEL ADJUSTMENT
This is a "slider" bar graph control. Use the 8 key to move the graph to the left, decreasing the numbers
and contrast level. Use the 9 key to move it to the right, increasing the numbers and contrast level. In
manual contrast mode, this is a direct adjustment of the display contrast. In automatic contrast mode, this
adjusts the offset to the automatically compensated contrast, with the default set to an offset of 50.
5.2.8 VFR Key Configuration Page
VFR KEY FUNCTIONALITY
Available settings are 'Enable' or 'Disable'. Use the 8
Key to select 'Disable', or the 9 Key to select the
'Enable' setting.
SELECTION
ENABLE
DISABLE
5.2.9 ARINC 429 Configuration Pages
ARINC 429 INPUT
The ARINC 429 INPUT Pages configure the ARINC 429 input
ports. Each port can be configured independently for the desired
function(s). The ARINC 429 IN 1 INPUT allows automated
automated start and stop of the flight timer and places the transponder in ground (GND) mode upon
landing. The same input data source cannot be selected for multiple input channels 1 through 3. ADLP is
included for future use.
For a connection to a Garmin GTS 820 or GTS 850, GARMIN TAS (HIGH) must be selected.
Barometric data is not included in the GARMIN TAS format. A separate barometric data source is
required
GTX 330/GTX 330D Installation Manual
190-00207-02
DESCRIPTION
DEFAULT. Display contrast is automatically compensated for LCD
temperature and other factors. An offset can be entered in the contrast
level adjustment described below.
Display contrast is manually adjusted either here or by the pilot using
the GTX 330 CONTRAST page.
DESCRIPTION
DEFAULT. The VFR Key functions normally in this setting.
When the VFR Key is disabled and the VFR key is pressed, the unit
displays an advisory message that indicates no operation took place.
Advisory message clears after 5 seconds elapses, or if the CLR key is
pressed. All other keys behave normally.
CONTRAST CONFIGURATION Page
VFR KEY CONFIGURATION Page
ARINC 429 INPUT (First) Page
ARINC 429 INPUT (Second) Page
Page 5-11
Revision R

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Gtx330d

Table of Contents