8. Inspection and Maintenance Schedule
8.1 Annual Servicing
In order to maintain its safe and efficient operation, it is
recommended that the boiler is serviced annually.
CAUTION
Servicing must be performed by a
qualified service agency or gas
supplier
Inspection
Visual inspection for general signs of corrosion
Checking and adjusting the gas/air ratio
Checking flue gas
Carrying out a water leak test in operation
Carrying out a gas leak test in operation
Checking hot water temperature and flow
Checking noise
Checking flue systems
Checking the remote controller
Maintenance
Draining the boiler and cleaning the inlet water filter
Cleaning the Return Filter
Cleaning the intake air filter
Flushing the heat exchanger
Replacement of parts
8.2 Maintenance Report
Inspection Items
Draining the Boiler and
Cleaning the Inlet
Water Filter
Cleaning the Return
Filter
Checking the Intake
Air Filter
Flushing the Heat
Exchanger
Replacement of Parts
Version 1.0
Record
Date:
Date:
YES / NO
YES / NO
YES / NO
YES / NO
8.3 Maintenance Schedules
Owner maintenance
Check boiler area
Daily
Check pressure / temperature
gauge
Check flue piping
Check air piping (if installed)
Check air and flue termination
Monthly
screens
Check relief valve
Check condensate drain
Check air ducts
Test low water cut-off (if used)
Periodically
Reset button (low water cut-off)
Every 6
Check boiler piping (gas and water)
months
for leaks Operate relief valve
End of heating
Shut boiler down (unless boiler
season
used for domestic hot water)
8.4 Inspection Report
Inspection Items
Visual Inspection for
General Signs of
Corrosion
Checking and
Adjusting the Gas/Air
Ratio
Checking Flue Gas
Carrying Out a Water
Leak Test in Operation
Carrying Out a Gas
Leak Test in Operation
Checking Hot Water
Temperature and Flow
Checking Noise
Checking Flue Systems
Checking the front
panel.
Record
Date:
Date:
YES / NO
YES / NO
YES / NO
YES / NO
YES / NO
YES / NO
YES / NO
YES / NO
YES / NO
NCB Service Manual 137