Table of Contents
Advertisement
(a)
(b)
Figure 10. Attach a ball head to the mounting block
2. For a heavy payload (more than 1.2kg or 2.6lbs, including lens), a counterweight (CW) balance kit
should be used (sold separately, #3324) as shown in Figure 12. Please retreat the polar scope by
about 10 mm after the polar alignment is done, to avoid a possible interference between the CW
balance kit and the polar scope.
(c)
Figure 12. Mounting a camera with CW balance kit
Figure 11. Attach a camera
10
Advertisement
Table of Contents
