Yamaha FJR1300A Owner's Manual page 62

For your safety – pre-operation checks
ITEM
Clutch
Throttle grip
Control cables
4
Wheels and tires
Brake and shift pedals
Brake and clutch le-
vers
Centerstand, side-
stand
Chassis fasteners
Instruments, lights,
signals and switches
Sidestand switch
• Check operation.
• If soft or spongy, have Yamaha dealer bleed hydraulic
system.
• Check fluid level in reservoir.
• If necessary, add specified brake fluid to specified level.
• Check hydraulic system for leakage.
• Make sure that operation is smooth.
• Check throttle grip free play.
• If necessary, have Yamaha dealer adjust throttle grip
free play and lubricate cable and grip housing.
• Make sure that operation is smooth.
• Lubricate if necessary.
• Check for damage.
• Check tire condition and tread depth.
• Check air pressure.
• Correct if necessary.
• Make sure that operation is smooth.
• Lubricate pedal pivoting points if necessary.
• Make sure that operation is smooth.
• Lubricate lever pivoting points if necessary.
• Make sure that operation is smooth.
• Lubricate pivots if necessary.
• Make sure that all nuts, bolts and screws are properly
tightened.
• Tighten if necessary.
• Check operation.
• Correct if necessary.
• Check operation of ignition circuit cut-off system.
• If system is not working correctly, have Yamaha dealer
check vehicle.
4-2
CHECKS PAGE
6-23,
6-25
6-19,
6-28
6-27
6-20,
6-22
6-28
6-29
6-29
—
—
3-43