Yamaha FJR1300A Owner's Manual page 31

This function allows you to
check and reset the
"TIME–2" and "TIME–3"
functions. These time trips
show the total elapsed
time that the key has been
in the "ON" position. When
the key is turned to "OFF",
Time Trip
the trip times stop count-
ing but are not reset. The
maximum time that can be
shown is 99:59.
When the time trips reach
99:59, they automatically
reset to 0:00 and continue
counting.
This function allows you to
switch the display units
between kilometers and
miles. When kilometers are
Unit
selected, the fuel con-
sumption units can be
switched between
"L/100km" and "km/L".
This function allows you to
change the items shown in
Display
3 information displays.
This function allows you to
adjust the brightness of
the multi-function meter
Brightness
unit panel to suit the out-
side lighting conditions.
This function allows you to
Clock
set the clock.
This function allows you to
reset all items, except the
All Reset
odometer and the clock.
Adjusting the temperature levels of the
grip warmer settings
1. Use the select switch to highlight
"Grip Warmer".
Instrument and control functions
3-17
MENU
Grip Warmer
Maintenance
Time Trip
Unit
Display
Brightness
Clock
2. Push the "MENU" switch. The grip
warmer setting display will be
shown and "High" will flash in the
display.
Grip Warmer
Hi g h
Middle
Low
3. Push the "MENU" switch. The
temperature level for the high set-
ting will start flashing.
Use the select switch to set the
temperature level, and then push
the "MENU" switch. "High" will
start flashing.
Grip Warmer
Hi g h
Middle
Low
10
5
1
10
5
1
3