Yamaha FJR1300A Owner's Manual page 29

TIP
 –9 °C will be displayed even if the
ambient temperature falls below
–9 °C.
 50 °C will be displayed even if the
ambient temperature
above 50 °C.
 The accuracy of the temperature
reading may be affected when rid-
ing under 20 km/h (12 mi/h) or
when stopped at traffic signals
and railroad crossings.
Coolant temperature display:
C.TEMP
The coolant temperature display indi-
cates the temperature of the coolant.
The coolant temperature varies with
changes in the weather and engine
load.
If the message "Hi" flashes, stop the
vehicle, then stop the engine and let
the engine cool. (See page 6-38.)
GEAR
4
C.TEMP
TIP
The selected information display can-
not be switched while the message
"Hi" is flashing.
Instrument and control functions
climbs
˚C
Lo
˚C
Hi
3-15
NOTICE
Do not continue to operate the en-
gine if it is overheating.
Average fuel consumption display:
FUEL AVG
The average fuel consumption display
modes "km/L", "L/100km" or "MPG"
show the average fuel consumption
since the display was last reset.
 The "km/L" display shows the av-
erage distance that can be trav-
eled on 1.0 L of fuel.
 The "L/100km" display shows the
average amount of fuel necessary
to travel 100 km.
 The "MPG" display shows the av-
erage distance that can be trav-
eled on 1.0 Imp.gal of fuel.
To reset the average fuel consumption
display, use the select switch to select
the information display that contains
the average fuel consumption display.
Push the "RESET" button briefly so
that the average fuel consumption dis-
play flashes, and then push the "RE-
SET" button again for 2 seconds while
the display is flashing.
TIP
After resetting the average fuel con-
sumption display, "_ _._" will be shown
for that display until the vehicle has
traveled 1 km (0.6 mi).
ECA10022
km/L
12.3
3