Alcatel-Lucent 5620 User Manual page 63

Release 12.0 R7 | December 2014 | 3HE 08833 AAAD TQZZA Edition 01
Add ports or LAGs to the operational group
Add ports to the operational group, as required.
6
i
ii
iii
iv
7 Add LAGs to the operational group, as required.
i
ii
iii
iv
Alcatel-Lucent 5620 Service Aware Manager
5620 SAM
Nuage Virtualization User Guide
On the equipment tree, expand NE→Shelf→Card Slot→Daughter Card
Slot→Port.
Right-click on a port and choose Properties. The Physical Port (Edit) form
opens.
Select an operational group in the OperGroup and ServiceProfile panel.
You can assign the port to be a member or a monitor of an operational group.
Save your changes and close the forms.
On the equipment tree, expand NE→Logical Groups→LAGs.
Right-click on a LAG and choose Properties. The LAG (Edit) form opens.
Select an operational group in the OperGroup and ServiceProfile panel.
Save your changes and close the forms.
9 — Network monitoring and troubleshooting
9-5