Alcatel-Lucent 5620 User Manual page 52

Release 12.0 R7 | December 2014 | 3HE 08833 AAAD TQZZA Edition 01
8 — Network management
Assign network elements to the POD
To assign a network element to the POD, perform one of the following.
6
a
b
c
Create a DC interconnect
7 Right-click on the Data Center in the navigation tree and select Create DC
Interconnect. The Data Center Interconnect (Create) form opens.
8 Configure the general parameters, as required.
The General tab displays general identification information for the interconnect,
such as name, description, and location.
9 Assign a contact information profile.
The Contact Information tab lists the contact information profiles assigned to the
interconnect. Contact information profiles list the name, phone number, email,
and other information related to the associated contact. You can assign an
existing contact information profile to the interconnect or create a new one.
10 Save your changes and close the form.
Assign network elements to the interconnect
11 The options for assigning network elements to the interconnect are the same as
those for assigning network elements to a POD. See step
8-12
Assign undiscovered network elements to the POD by creating a discovery
rule which assigns your designated POD to the discovered network elements.
See Chapter 6 for more information.
Assign a discovered network element to the POD from the Cloud Network
navigation tree by clicking and dragging a network element icon from the
topology map to the POD on the navigation tree.
Assign multiple discovered network elements to the POD from the properties
form, perform the following steps.
i Navigate to the Network Elements tab on the POD properties form.
The Network Elements tab lists the network elements contained in the
POD.
ii Click Assign Sites. The Assign Filter form opens.
The Assign Filter form allows you to filter all available network
elements based on designated criteria. You can filter on more than one
parameter at once. If you assign no filter criteria, all available network
elements are listed.
iii Click OK to view the filtered list of network elements.
iv Select network elements from the Unassigned Sites or Assigned Sites
panel and use the arrows buttons to move them.
v Save your changes and close the form.
6 for more information.
Alcatel-Lucent 5620 Service Aware Manager
Nuage Virtualization User Guide
5620 SAM