Alcatel-Lucent 5620 User Manual page 35

Release 12.0 R7 | December 2014 | 3HE 08833 AAAD TQZZA Edition 01
17 Click Create. The Post Discovery Action (Create) form opens.
18 Configure the required parameter.
19 Click Select for the Control Script Name and choose the Configure End-to-End IP
CTL script.
20 Click Select for the Control Script Instance Name and choose the Configure
End-to-End IP CTL script instance you created in step 12.
21 Click OK.
Create a discovery rule
22 On the Discovery Manager form, click on the Discovery Rules tab.
23 Click Create. The Create Discovery Rule step form opens.
24 Configure the parameters in Step 1, as required, and click Next.
25 Click Create to create a rule element. The Topology Discovery Rule Element form
opens.
26 Configure the parameters and click OK to add a rule element to the discovery rule.
Repeat this step to add multiple rule elements, as required.
27 Configure the options in the other steps of the step form, as required. See the
5620 SAM User Guide for more information on these steps.
28 On the Add Post Discovery Action step, select the post-discovery action you
created in step 16.
29 Click Finish to create the discovery rule.
30 Click Apply on the Discovery Manager form to save changes.
Execute the discovery rule
31 On the Discovery Rules tab, select the discovery rule you created and click Rescan.
The 5620 SAM scans the IP addresses specified in the discovery rule elements and
discovers them into the network. The network elements are automatically
configured with the specified script bundles.
Alcatel-Lucent 5620 Service Aware Manager
5620 SAM
Nuage Virtualization User Guide
6 — Device commissioning and discovery
6-5