Exup System - Yamaha FAZER FZS1000 Owner's Manual

INSTRUMENT AND CONTROL FUNCTIONS
NOTE:
Although the total number of clicks of a
damping force adjusting mechanism
may not exactly match the above spec-
ifications due to small differences in
production, the actual number of clicks
always represents the entire adjusting
range. To obtain a precise adjustment,
3
it would be advisable to check the num-
ber of clicks of each damping force ad-
justing mechanism and to modify the
specifications as necessary.
WARNING
This shock absorber contains highly
pressurized nitrogen gas. For prop-
er handling, read and understand
the following information before
handling the shock absorber. The
manufacturer cannot be held re-
sponsible for property damage or
personal injury that may result from
improper handling.
G
Do not tamper with or attempt to
open the gas cylinder.
G
Do not subject the shock ab-
sorber to an open flame or other
high heat sources, otherwise it
may explode due to excessive
gas pressure.
G
Do not deform or damage the
gas cylinder in any way, as this
will result in poor damping per-
formance.
G Always have a Yamaha dealer
service the shock absorber.
EWA10220

EXUP system

This model is equipped with Yamaha's
EXUP (EXhaust Ultimate Power valve)
system. This system boosts engine
power by means of a valve that regu-
lates the diameter of the exhaust pipe.
The EXUP system valve is constantly
adjusted in accordance with the engine
speed by a computer-controlled servo-
motor.
CAUTION:
3-16
G The EXUP system has been set
and extensively tested at the
Yamaha factory.
these settings without sufficient
technical knowledge may result
in poor performance of or dam-
age to the engine.
G If the EXUP system does not op-
erate, have a Yamaha dealer
check it.
EAU15280
ECA10190
Changing