Sensor Cover - Miele CVA 6800 Operating And Installation Instructions

Cleaning and care
 Reassemble the spout unit in the
reverse order. Make sure the top
connection piece  engages with a
click. Firmly push the spout jets 
onto the dispensing unit.
Make sure that all parts are tightly
connected to one another.
 Refit the dispensing unit in the central
spout and touch
 Then refit the cover and touch
The central spout will now be rinsed
through.
64
.
OK
OK .

Sensor cover

The sensor cover for the cup protection
switch-off is located at the base of the
central spout. If the automatic spout
adjustment sensors do not properly
recognise a cup, the cup protection
switch-off will stop the central spout
from lowering.
Clean the sensor cover once a week in
the dishwasher or by hand using warm
water and a little washing-up liquid,
applied with a soft cloth.
 To remove the sensor cover, press
and hold the cover  between the
two dispensing spouts. Then press
the sides of the central spout  at
the back.
The sensor cover will come off.
To refit it:
 Insert both hooks at the back and
press the sensor cover upwards.