Toyota Sienna 2016 User Manual page 248

248
4-3. Operating the lights and wipers
WARNING
■
Limitations of the Automatic High Beam
Do not rely on the Automatic High Beam. Always drive safely, taking care to
observe your surroundings and turning high beam on or off manually if nec-
essary.
NOTICE
■
Camera sensor
Observe the following to ensure that the
Automatic High Beam functions correctly.
Do not touch the camera sensor.
●
Do not subject the inside rear view mirror or the camera sensor to a strong
●
impact.
Do not disassemble the camera sensor.
●
Do not spill liquid onto the inside rear view mirror or the camera sensor.
●
Do not apply window tinting or stickers to the camera sensor or the area of
●
windshield near the camera sensor.
Do not place items on the dashboard. There is a possibility that the cam-
●
era sensor will mistake items reflected in the windshield for streetlights,
the headlights of other vehicles, etc.
Do not install a parking tag or any other accessories near or around the
●
inside rear view mirror and the camera sensor.
Do not overload the vehicle.
●
● Do not modify the vehicle.
Do not replace windshield with a non-genuine windshield.
●
Contact your Toyota dealer.
■ Headlight leveling
When the vehicle is loaded, headlight level should be adjusted to appropri-
ate dial setting. (P. 241)
SIENNA_OM_OM08013U_(U)