Figure 74
1. Left motion control lever
2. Right motion control lever
2. Lift and remove the cable lock securing the cable
adjusting nuts (Figure 75).
3. Rotate the right cable adjustment to place the right
motion control lever in the center of the neutral lock
slot in the control panel.
4. Rotate the left cable adjustment to place the left motion
control lever alignment equal with the right motion
control lever. This will provide an approximate equal
tracking of the left wheel speed to the right wheel
speed.
5. Check for proper tracking. Refer to Adjusting the
Tracking in the Maintenance Section.
6. Install the cable lock onto the cable adjusting nuts to
secure the adjustment (Figure 75).
g015241
3. Neutral locked position
4. Align the control levers
front to back
1. Left cable adjustment
2. Cable lock
49
Figure 75
3. Right cable adjustment
g017848