Factory Mode - Yamaha CD-C600 Service Manual

CD-C600

■ FACTORY MODE

● Starting Factory Mode
While pressing the "PURE DIRECT" and "
"POWER ON/OFF" switch to turn on the power.
The Factory Mode is activated.
"POWER ON/OFF" switch
Display provided when factory mode started
F A C T O R Y
● Operation Procedure of Factory Mode
Function list of remote control keys
Key Key code
DISPLAY 79-0A
CLEAR 79-0D
● Canceling Factory Mode
Press the "POWER ON/OFF" switch of this unit to turn off the power.
18
/ " (Play/Pause) keys of this unit as shown in the figure below, press the
FL display
While pressing these keys, press the "POWER ON/OFF" switch to turn on the power.
FL display
L O A D I N G
Firmware version of the microprocessor
(IC305 of the MAIN P.C.B.) is displayed.
Firmware version of the USB IC
(IC7 of the MAIN P.C.B.) is displayed.
EEPROM (IC304 of the MAIN P.C.B.) is initialized.
N O D I S C
Function
* Press the "CD/USB" key to select the CD mode
* Press the "CD/USB" key to select the USB mode