Test Mode - Yamaha CD-C600 Service Manual

■ TEST MODE

● Starting Test Mode
When starting the test mode, check the FL display and indicators for display/indication condition.
1. While pressing the "DISC 3", "PURE DIRECT" and " " (Stop) keys of this unit as shown in the figure below, press the
"POWER ON/OFF" switch to turn on the power and keep pressing those 3 keys.
"POWER" indicator
"POWER ON/OFF" switch
All segments ON
2. While keep pressing those 3 keys, check that all indicators (POWER, iPod/USB, PURE DIRECT) are lit. At the same
time, check that all segments of the FL display are lit.
3. Release those 3 keys. Then check that USB and PURE DIRECT indicators as well as all segments of the FL display
are turned off.
4. The Test Mode is activated.
● Operation Procedure of Test Mode
Function list of remote control keys
Key Key code
OPEN/CLOSE 79-01
1 79-11
2 79-12
3 79-13
4 79-14
5 79-15
6 79-16
7 79-17
8 79-18
9 79-19
● Canceling Test Mode
Press the "POWER ON/OFF" switch of this unit to turn off the power.
FL display
"PURE DIRECT" indicator
While pressing these keys, press the "POWER ON/OFF" switch to turn on the power.
FL display
Release the keys
–
Laser on
Laser off
Focus operation
Traverse in
Traverse stop
Traverse out
Spindle reverse
Spindle off
Spindle on
"iPod/USB" indicator
All segments OFF
Function
* Press the "5" key to stop traverse.
* Press the "5" key to stop traverse.
* Press the "8" key to stop spindle.
* Press the "8" key to stop spindle.
CD-C600
17