Yamaha CD-C600 Service Manual page 11

• Precaution for installation of the Disc Tray Ass'y.
On disc tray ass'y setting.
Check the direction of marking "
to this drawing. (Fig. 3)
Gear/L01
Marking
Fig. 3
• IMPORTANCE: Installation of Table.
Install the table according to the following procedure.
a. Slide the lever so that the gear/RT1 becomes
free. (Fig. 4)
b. With the " " mark on the gear/RT1 aligned with
▲
the same mark on the disc tray, lock it with the
lever. (Fig. 4)
c. Install the table by aligning it to the thick line on " / "
mark. (Fig. 5)
* Check that the table is locked after installation.
Fit the gear/RT1 to "
Gear/RT1
Disc tray ass'y
Lever
Lock
Unlock
Fig. 4
Fit the table to the thick line on "
Fig. 5
" on gear according
▲
Gear/L0
Front panel
▲ " mark.
/
" mark.
Disc tray
Table
CM-230B unit can not be removed without
removing the Front Panel Unit.
5-A. Removal of Front Panel Unit
a. Remove 2 screws ( ⑦ ) and 3 screws ( ⑧ ). (Fig. 6)
b. Remove CB6, CB304, CB804 and CB809. (Fig. 7)
c. Remove the front panel unit. (Fig. 6)
CM-230B unit
Front panel unit
7
8
Fig. 6
CB804
Fig. 7
CD-C600
7
CB304 CB6
CB809
11