Table of Contents
Advertisement
Advanced settings
This section explains how to configure various advanced functions. You can configure
these settings from the front panel.
This unit (front panel)
A
PURE DIRECT
1
Turn off the power to the unit (page 11).
2
While pressing and holding PURE DIRECT and
simultaneously, press A (Power).
The following indicator appears on the information display of the front panel, and
the unit enters Setting mode. You can set the Playback Mode Memory, Ready
Mode, Automatic Playback, and Auto Power Standby functions in this order.
CD
TEXT AAC WAV FLAC RESUM RDY
TRACK
TOTAL REMAIN
PROG
RNDM REP FOLDER ALL
3
Press
(Skip backward/Search backward) or
(Skip forward/Search forward) to set the parameter to on or off.
4
Press
(Stop).
The setting is saved, and the next parameter is automatically selected. Repeat
steps 3 and 4. When all settings are complete, press
turn off the power to the unit.
Note
• If you press
(Play/Pause) during this process, the setting at that point will be
saved. Turn off the power to the unit.
22
En
(Open/Close)
CD
TEXT AAC WAV FLAC RESUM RDY
TRACK
TOTAL REMAIN
PROG
RNDM REP FOLDER ALL
(Play/Pause) and
Playback Mode Memory (PLAY MEM)
With this function enabled, the unit retains the Repeat playback and Random-sequence
playback settings. When the Playback Mode Memory function is turned on, the
advanced setting indicator (RESUM) on the display lights up.
Default: Off
Note
• If you turn the power to the unit off and then on after enabling the Playback Mode Memory function,
the unit will play the most recently-played track or file from the beginning.
Ready Mode (RDY MODE)
With this function enabled, the unit pauses each time the playback of a track has
completed. You can start playback of the next track when you choose. When the Ready
Mode function is turned on, the advanced setting indicator (RDY) on the display lights
up.
Default: Off
Automatic Playback (AUTO PLAY)
With this function enabled, the unit automatically starts playback when power to the unit
is turned on or when you switch to Disc or USB mode.
Default: On
Auto Power Standby (AUTO STBY)
With this function enabled, the unit automatically enters Standby mode if you do not
interact with it for 20 minutes after the playback has stopped.
Default: On
Advertisement
Table of Contents
