Table of Contents
Advertisement
Light indicator
The status of the light indicator indicates the different printer conditions.
Status
off
The printer is not powered.
lit
The printer is powered.
flashing slowly
The printer is receiving data.
flashing rapidly
An operating error has occurred:
Paper out condition.
Solution: Load paper (see "Loading paper ... " in the Installation Guide) and press
PAPER.
Paper jam condition.
Solution: Remove the jammed page (see the specific topic in the on-line documentation
loaded when you installed the printer driver).
Print head insertion/replacement operation.
You have moved the print head carriage to the head loading position (using the button
sequence on the operator panel or the "Change" button in the Printer Monitor).
Solution: Return the print head carriage immediately to its rest position, repeating the
button sequence, or replace the print head (see specific section in More about print
heads).
flashing very rapidly
Failure condition.
Switch off the printer and disconnect it from the electrical power supply. Make sure that
the print head carriage and paper feed paths are not obstructed and then reconnect
and switch on the printer.
If the light indicator continues flashing rapidly, disconnect the printer and call the
technical support service or your dealer.
flashing with specific
One of the service functions (see previous table - "Buttons - special functions").
variable sequence
6
Condition
User guide
Advertisement
Table of Contents
