Buttons - Special Functions - Olivetti ARTJET 20 User Manual

Buttons - special functions

Function
Print head carriage Hold down Power and
movement press Paper, then release
both buttons together
Print test Hold down Power and
press Paper twice; then
release both buttons
together
Clean print heads Hold down Power and
press Paper three times;
then release both buttons
together
Demo page Hold down Power and
press Paper four times;
then release both buttons
together
Hex dump Hold down Power and
press Paper seven times;
then release both buttons
together
Clean paper feed Hold down Power and
rollers press Paper nine times;
then release both buttons
together
User guide
Buttons
Toggles the print head carriage loading/rest position.
The light indicator flashes with a simple ON-OFF
sequence.
This operation can also be done from the Printer Monitor.
The light indicator flashes with a two-flash sequence.
The print test is printed, after which the printer returns to
standby mode.
This operation can also be done from the Printer Monitor.
The light indicator flashes with a three-flash sequence.
A print head cleaning cycle is executed, after which the
printer returns to standby mode.
This operation can also be done from the Printer Monitor.
The light indicator flashes with a four-flash sequence.
The demo page is printed, after which the printer returns
to standby mode.
This operation can also be done from the Printer Monitor.
The light indicator flashes with a seven-flash sequence.
All data now transmitted to the printer will be printed in
its hexadecimal format.
This feature can be activated ONLY from the operator
panel and should be used only if requested by your
technical support engineer, as it can generate long
print-outs.
The light indicator flashes with a nine-flash sequence.
The paper feed rollers will start turning without loading the
paper. To clean the rollers, press lightly on them with a
clean, damp, lint-free cloth.
To exit from this function, you must switch off the
printer.
Description
5