Omron NB3Q-TW00B Setup Manual page 58

X represents the amount of NB series products, and y represents the amount of PLC. The
relationship between x and y must meet the following conditions:
• x ≥ 1
• y ≥ 1
• x + y ≤ 33
In this system architecture, the system has only one network number. And the unique ID, i.e. Node
ID, is assigned to both NB and PLC in the system.
When the actual amount of configured devices (NB series products + PLC) is greater than 33, the
customer can create a new NB-Designer project to handle this problem.
Recommended Network Configuration Devices
The following products are recommended for configuring the network when an Ethernet Unit is used.
Part
Hub
Twisted-pair cable
Connectors(Modul
ar plug)
NB-series Programmable Terminals Setup Manual(V107)
2 Installing the NB Unit and Connecting Peripheral Devices
Maker Model number
100BASE-TX
OMRON W4S1-03B
OMRON W4S1-05B(C)
Phoenix SWITCH5TX
Contact
10BASE-T
AlliedTelesis MR820TLX
100BASE-TX
Fujikura F-LINK-E0.5mm x
4P
Fujikura CTP-LAN50.5mm
x 4P
10BASE-T
Fujikura F-LINK-E0.5mm x
4P
Fujikura CTP-LAN50.5mm
x 4P
STP Plug
Panduit Corp MPS588
UTP Plug
Panduit Corp MP588-C
WWW.NNC.IR
Specifications
10/100 Mbit/s 3-port hub
10/100 Mbit/s 5-port hub
10/100 Mbit/s 5-port hub
9-port hub with 10Base-
5backbone port
STP (shielded twisted-
pair) cable: Category 5, 5e
Note: Impedance is limited
to 100.
UTP (unshielded twisted-
pair) cable: Category 5, 5e
STP (shielded twisted-
pair) cable: Category 3, 4,
5, 5e
Note: Impedance is limited
to 100.
UTP (unshielded twisted-
pair) cable: Category 3, 4,
5, 5e
---
---
Inquires
Allied Telesis(0120)
86-0442(in Japan
only)
---
2-27
2