Water Level - Maytag MVWC565FW Use And Care Manual

7.
Select SOIL LEVEL
Once you select a cycle, select the soil level by turning the Soil
Level knob to the desired setting.
8.
Select wash temperature
Once you select a cycle, select the wash temperature
by turning the Wash Temp knob to the desired setting.
Always read and follow fabric care label instructions to avoid
damage to your items.
Wash Temp
Hot
Some cold water is added to save
energy. This will be cooler than your
hot water heater setting.
Warm
Some cold water will be added, so
this will be cooler than what your
previous washer provided.
Cool
Warm water is added to assist in
soil removal and to help dissolve
detergents.
Cool is slightly warmer than Cold.
Cold
Warm water may be added to assist
in soil removal and to help dissolve
detergents.
Tap Cold
This is the temperature from your
faucet.
Suggested Fabrics
Whites and pastels
Durable items
Heavy soils
Bright colors
Moderate to light soils
Colors that bleed
or fade
Light soils
Dark colors that
bleed or fade
Light soils
Dark colors that
bleed or fade
Light soils
9.
Select RINSE OPTIONS and

WATER LEVEL

Select the number of rinses by turning the Rinse Options knob to
the desired setting.
IMPORTANT: The Rinse Options knob must be set to an option
"with Fabric Softener" when using the fabric softener dispenser.
This ensures that fabric softener is added at the correct time in
the rinse for even distribution.
Set the Water Level knob to the Auto Sensing setting and the
washer will automatically sense the appropriate water level for
the load size and type.
Set the Water Level knob to the Deep Water Wash setting and
the washer will fill to the maximum water level.
Note: The cycle will be longer due to extended fill times when
using the Deep Water Wash setting.
10.
Press START/Pause to
begin wash cycle
Press the START/PAUSE button to start the wash cycle. When
the cycle has finished, the Done status light will light. Promptly
remove garments after cycle has completed to avoid odor,
reduce wrinkling, and avoid rusting of metal hooks, zippers,
and snaps.
Unlocking the lid to add garments
If you need to add 1 or 2 missed garments after the wash has
started, simply open the lid and this will pause the cycle. After
adding the garments, simply close the lid and the cycle will
resume.
If, instead, you press the START/PAUSE button to pause the
cycle and then open the lid to add garments, you will need to
press the START/PAUSE button after closing the lid to resume
the cycle.
NOTE: Washer will not fill with the lid open.
IMPORTANT: If lid is left open for more than 10 minutes, the
water will pump out automatically.
Manual soak
If you would like to manually soak your garments at any time
during the wash portion of the cycle, press START/PAUSE and
leave the lid closed. Once your desired soak time has elapsed,
press START/PAUSE again to continue the cycle. As long as the
lid remains closed, your soak time can be longer than 10 minutes.
However, if the lid is opened during the soak and remains open
for more than 10 minutes, the water will pump out automatically.
9