System Parameters - Ricoh DDP 70e Programming Manual

System Parameters

System parameters, in many cases, permanently alter the overall configuration of a
product. They are set using the operator
currentsystemparams
System parameters are not subject to
Listed below are the system parameters present in the printer.
Key Type
BuildTime*
integer
ByteOrder*
boolean
CurDisplayList**
integer
CurFontCache**
integer
CurFormCache**
integer
CurInputDevice**
string
CurOutlineCache**
integer
CurOutputDevice**
string
CurPatternCache**
integer
CurScreenStorage**
integer
CurSourceList**
integer
CurUPathCache**
integer
DoPrintErrors§
boolean
DoStartPage
boolean
FactoryDefaults§
boolean
FatalErrorAddress§
integer
FontResourceDir
string
setsystemparams
. In general, setting system parameters requires a password.
and
save
System Parameters
Default
Time dependent See Section 3.2 of the Supplement.
false See Section 3.2 of the Reference Manual.
0 See Section 3.2 of the Reference Manual.
0 See Section 3.2 of the Reference Manual.
0 See Section 3.2 of the Reference Manual.
( ) See Section 3.2 of the Supplement.
0 See Section 3.2 of the Reference Manual.
( ) See Section 3.2 of the Supplement.
0 See Section 3.2 of the Reference Manual.
0 See Section 3.2 of the Reference Manual.
0 See Section 3.2 of the Supplement.
0 See Section 3.2 of the Reference Manual.
true See Section 3.2 of the Supplement.
false See Section 3.2 of the Supplement.
false See Section 3.2 of the Supplement.
0 See Section 3.2 of the Supplement.
(fonts/) See Section 3.2 of the Supplement.
PostScript Language Printer Commands
and read using the operator
. Their values persist across jobs.
restore
For More Information
1-15