Step 5: Connect The Cable(S) - LevelOne FCS-1152 Hardware User Manual

Step 5: Connect the Cable(s)

1. Connect the network cable to the Ethernet port of the camera.
2. If necessary, connect audio input/output or DI/DO devices to the camera. See
Connect DI/DO and Audio Devices (Optional)
3. Connect the other end of the network cable to a switch or injector. Then, connect the switch
or injector to a network, PC and a power source. See Power-over-Ethernet (PoE) connection
example below.
Hardware Manual
Network
Ethernet Cable
Ethernet Cable
(Data)
PoE Injector /
PoE Switch
Ethernet Cable
(Data + Power)
Camera
21
on page 10 for more information.
Power Cable
AC Power
Source
How to