Hardware Description; Product Description; Front Panel - Planet FSD-804P User Manual

This product provides two different running speeds – 10Mbps, 100Mbps in the same switch and automatically distinguishes
the speed of incoming connection.
This section describes the hardware features of FSD-804P. For easier management and control of the Switch, familiarize
yourself with its display indicators, and ports. Front panel illustrations in this chapter display the unit LED indicators. Before
connecting any network device to the FSD-804P, please read this chapter carefully.
In the following section, the term "Switch" means the Switch device, ie. FSD-804P; term of "switch" can be any third
switches

2.1 Product Description

The FSD-804P is equipped with unshielded twisted-pair (UTP) cable ports providing dedicated 10 or 100Mbps bandwidth.
The FSD-804P supports MDI/ MDI-X convertible on 8-10/100Mbps ports, also provide PoE inject function on port#1, 2, 3,
4, which is able to drive 4 IEEE 802.3af compliant powered devices. The dual speed ports use standard twisted-pair cabling
and are ideal for SOHO or segmenting networks into small. Each 10/100Mbps port can supports up to 200Mbps of
throughput in full-duplex mode, the FSD-804P also provides a simple, cost-effective, and highly reliable network
connection for data as well as power. Furthermore, it is the ideal device for bridging among Ethernet, Fast Ethernet
workgroups and networks.
With 4 PoE interfaces, the FSD-804P is ideal for small business and workgroups requiring to deploy the PoE for the
wireless access points, IP-based surveillance camera or IP phones in any places easily, efficiently and cost effective.
The front panel of FSD-804P provides LEDs for easy recognition of the switch operation status and troubleshooting. These
LED indicators display the power status for the system, LNK/ACT and speed for each10/100M port. Also the PoE in use
LED indicates for PoE ports (port#1 to port#4).
With data and power over Ethernet from one unit, the FSD-804P shall reduce cables and eliminates the need for dedicated
electrical outlets on the wall, ceiling or any unreachable place. A wire carries both data and power lowering the installation
costs, simplifying the installation effort and eliminating the need for electricians or extension cords. We are also proud of
the key feature – energy saving. With more efficient switching power supply, the efficiency of the FSD-804P would be much
better than four linear power adapters in a long run.

2.2 Front Panel

The Front Panel of the FSD-804P PoE Ethernet Switch consists of 8x Auto-Sensing 10/100Mbps Ethernet RJ-45 Ports.
The LED Indicators are also located on the front panel of the FSD-804P.
2.2.1 LED indicators
System
LED Color
PWR Green
Per 10/100Mbps port
LED Color
PoE In-use Green
Figure 2-1 FSD-804P Switch front panel
Lights to indicate that the Switch has power.
Lights to indicate the port is providing 48VDC in-line power. (1-4 ports)

2. HARDWARE DESCRIPTION

Function
Function
- 6 -