Changing The Volume Level - Bernafon CHRONOS 9 Instructions For Use Manual

Changing the volume level

Bernafon Veras IFU micro BTE
VR_ILU_MultiControlMicroBTE_BW_HI
To increase the volume
Give a short press (less than 1 sec-
ond) to the upper button on the
Multi Control, repeating until you
reach the desired loudness level.
The hearing instrument will click to
confirm that the volume has been
changed and then will beep when
you reach the programmed maximum.
To decrease the volume
Give a short press (less than 1 second) to the l ower
button on the Multi Control, repeating until you
reach the desired loudness level. The hearing instru-
ment will click to confirm that the volume has been
changed and then will beep when you reach the
programmed minimum.
Note: Your instrument automatically returns to
a preset loudness level when it starts, the battery
is low, or when the program is changed. If you find
that you frequently need to turn the v olume up or
down, your hearing care professional may need to
adjust your hearing instrument settings.
16