Lexmark E120 User Manual page 41

Resource save off
Light sequence:
•
•
Secondary light sequence:
Press
sequence.
•
•
•
Message:
Too much memory has been allocated to the print buffer.
Solution:
•
•
Short paper
Light sequence:
•
•
Secondary light sequence:
Press
sequence.
•
•
•
•
Message:
Paper length is too short to print the formatted data. This occurs when the printer does not know the loaded media
size or when there is a problem feeding the media.
Solution:
•
•
•
Downloaded From ManualsPrinter.com Manuals
Using the operator panels
Continue—On
Error—On
twice quickly to see the secondary light
Continue—On
Ready / Data—Blinking
Error—On
Press to clear message and continue printing.
Change the print buffer to a lesser amount, or set the print buffer to Auto (see Using the printer
resident Web page on page 43).
Continue—On
Error—On
twice quickly to see the secondary light
Continue—On
Ready / Data—On
Load / Remove Paper—On
Error—On
Make sure the loaded print media is large enough and paper size is set correctly in the Local Printer
Setup Utility paper size menu (see Software and Documentation CD).
Press to clear message and continue the job.
Press to cancel print job.
Overview of the Lexmark E120n operator panel
Primary light
sequence
Primary light
sequence
41
Secondary light
sequence
Secondary light
sequence