Lexmark E120 User Manual page 16

Restoring factory defaults
Light sequence:
•
•
Message:
Printer is resetting to the original factory default settings.
Solution:
Press and hold
C
artridge region mismatch
Light sequence:
Error—On
Secondary light sequence:
Press
sequence.
Ready / Data—Blinks four times
Message:
The toner cartridge being used is not programmed for the specific
region.
Solution:
Remove the toner cartridge, and install a new toner cartridge that is programmed for the same region as your
printer. See the back of the printer for a label with your printer region location. See Ordering supplies on page 66
for a list of correct supplies and part numbers.
Downloaded From ManualsPrinter.com Manuals
Using the operator panels
Ready / Data—On
Error—On
to reset printer.
twice quickly to see the secondary light
Overview of the Lexmark E120 operator panel
Primary light
sequence
16
Secondary light
sequence