Lexmark E120 User Manual page 18

Complex page
Light sequence:
Error—On
Secondary light sequence:
Press
sequence.
Ready / Data—Blinks three times
Message:
The page may not print correctly because the print information
on the page is too complex (that is, too large for printer memory).
Solution:
Turn printer off and back on to try printing the page again. If not successful:
•
To avoid this error in the future:
•
•
ENA connection lost
Light sequence:
Error—On
Secondary light sequence:
Press
sequence.
Ready / Data—Blinks five times
Message:
During power-on cycle, the printer detected the connection to
the external network adapter was lost.
Solution:
•
•
Downloaded From ManualsPrinter.com Manuals
Using the operator panels
twice quickly to see the secondary light
Press to clear message and continue processing the job (some print data may be lost).
Reduce complexity of the page by reducing the amount of text or graphics.
Set Page Protect to On in the Local Printer Setup Utility (see Software and Documentation CD).
twice quickly to see the secondary light
Note: This error is only detected during the power-on cycle.
Press to clear message.
Re-establish connection with the external network adapter.
Overview of the Lexmark E120 operator panel
Primary light
sequence
Primary light
sequence
18
Secondary light
sequence
Secondary light
sequence