Dry Only - Bosch WVTi 2840 Instruction Manual And Installation Instructions

Dry only

Setting a drying
programme
Pausing the drying
programme
Stopping the drying
programme
34
Downloaded From WashingMachine-Manual.com Manuals
i The tap must remain open during the drying cycle,
as cold water is needed.
i The maximum permitted load for drying is 2.5 kg.
i For hand washed items select a separate spin
cycle.
The washer dryer is switched off.
q Set the programme selector to Drying Y. This
switches the washer dryer on.
q Press the Drying Y button repeatedly until the
required drying time is set, page 30.
q Press the Delicate drying J button to set low
heat if desired, page 30.
q Press the Start M button.
The LED monitor lights up. The remaining time
appears in the display.
i The drying programme can be paused at any time
during the cycle.
q Press the Start M button for approx. 3 sec.
The display alternates between STOP and ---.
The Start M LED flashes.
Continuing the programme:
Press the Start M button again.
Opening the door
d Risk of burning!
Depending on the drying programme, the washing
can be very hot.
q Press the Door button on the front panel.
i The door can be opened after approx. 3 minutes.
Press the Start M button during the programme cycle
and keep pressed until 0000 appears in the display
(approx. 8 seconds).