The signal
Programme status
12
Downloaded From WashingMachine-Manual.com Manuals
The acoustic signal indicates:
- pressing a button
- the start of a programme
- the end of a programme
- operating errors and faults.
q Press the Reduced Time I and Delay Timer W
buttons simultaneously to activate or deactivate
the signal. The display shows j or i.
i The volume of the signal cannot be changed.
Press the Spin B button to show the programme
status in the display. The programme status appears
after the selected spin speed.
If the washer dryer is in the washing cycle, the ÊÊ
symbol appears in the Q (wash) display.
If the washer dryer is in the drying cycle, the ÊÊ
symbol appears in the Y (drying) display.
q Press the Door h button on the front panel.