Removing A Printer - Sony UPX-C200 Operating Instructions Manual

Canceling addition/registration of the
printer
To cancel addition/registration of the printer, the
following two methods are available:
• In Step 7, while "Searching New Printers . . ." is
displayed, press ENTER of the control button.
Searching is interrupted, and the display returns to
Bluetooth Menu.
• In Step 9, select CANCEL instead of ADD, then press
ENTER of the control button. Addition/registration of
the printer is canceled.
If a printer cannot be added/registered
Printers cannot be added/registered in the following
cases:
• Three printers have been already connected.
t Delete an unnecessary printer.
• The passkey of the printer is different from that of the
camera.
t Set the same passkey as that of the camera.

Removing a Printer

1
Display the Setup display.
For details, see "Displaying the Setup Display" on
page 14.
2
Press v or V of the control button to select
Bluetooth.
3
Press ENTER of the control button.
The Bluetooth Menu display appears.
4
Press v or V of the control button to select
REMOVE PRINTER.
The PRINTER LIST appears.
5
Press v or V of the control button to select a printer
to be removed.
6
Press b or B of the control button to select
REMOVE.
7
Press ENTER of the control button.
The printer selected in Step 5 is removed, and its
printer name and Bluetooth address are deleted.
8
Press ENTER of the control button again.
The display returns to Bluetooth Menu.
To cancel removing the printer
In Step 6, select CANCEL instead of REMOVE, then
press ENTER of the control button. Deletion of the
printer is canceled, and the display returns to Bluetooth
Menu.
Setting the Bluetooth Functions
29