Fujitsu PRIMERGY BX600 S3 Service Supplement Manual page 43

Replacement routines
Requirements
– None
Replacing the battery
Ê Remove the management blade from the basic unit (see Operating Manual).
Figure 23: Installing/removing the management blade battery
Ê Press the locking spring in the direction of the arrow (1) so that the lithium
battery is released from its carrier, and remove the battery (2).
Ê Place the new battery of the same type in the carrier (3) and press it in the
direction of the arrow (4) until it clicks into place.
Replacing the battery of the management blade
Service Supplement
"
!
43