Replacing The Hdd Card; Removing The 2.5" Hdd Cage - Fujitsu PRIMERGY RX300 S3 Service Supplement Manual

Replacing the HDD card

4.7 Replacing the HDD card
4.7.1

Removing the 2.5" HDD cage

Ê Remove the HDDs from the corresponding 2.5" HDD cage. For the
discription see operating manual "hot-plug components, hot-plug Hard Disk
Drives".
Please not the population sequence, that you can install the hard disk drives
in the same sequence.
Figure 22: 2.5" HDD cage emty
32 Service Supplement
Replacement routines
RX300 S3