Base Sensor Test - Oki MB 780 Service Manual

BASE SENSOR TESTS
This test is used to determine if the sensors located inside the printer are working
correctly. To run the Base Sensor Test:
Select BASE SENSOR TEST from the DIAGNOSTICS menu.
The following sensors are listed:
1. Toner Level—Toner level sensor (remove the cartridge and replace to actuate the
sensor)
2. Input—Input sensor
3. Output—Output (exit) sensor
4. Narrow Media—Output (exit) sensor
5. Front Door—Front door sensor
Manually actuate the sensors to verify that each sensor switches from "open to closed".
Press Stop to exit the test.
21