Firmware And Configuration File Prefix And Postfix; Managing Firmware And Configuration File Download - Grandstream Networks HT502 User Manual

Dual fxs port analog telephone adaptor

Hide thumbs Also See for HT502:

Table of Contents

A configuration parameter is associated with each particular field in the web configuration page.

parameter consists of a Capital letter P and 2 to 3 (Could be extended to 4 in the future) digit numeric

numbers.

i.e., P2 is associated with "Admin Password" in the ADVANCED SETTINGS page.

For a

detailed parameter list, please refer to the corresponding firmware release configuration template.

When a Grandstream device boots up or reboots, it will issue a request for a configuration file

"cfgxxxxxxxxxxxx", where "xxxxxxxxxxxx" is the MAC address of the device, i.e., "cfg000b820102ab". In

addition, device will also requests a XML configuration file "cfgxxxxxxxxxxxx.xml". If the download of

"cfgxxxxxxxxxxxx.xml" is not successful, the provision program will issue a request for a generic

configuration file "cfg.xml". Configuration file name should be in lower case letters.

For more details on Grandstream Device provisioning, please refer to:

http://www.grandstream.com/sites/default/files/Resources/gs-provisioning_guide_public.pdf

Firmware and Configuration File Prefix and Postfix

Firmware Prefix and Postfix allows device to download the firmware name with the matching Prefix and

Postfix. This makes it the possible to store ALL of the firmware with different version in one single directory.

Similarly, Config File Prefix and Postfix allows device to download the configuration file with the matching

Prefix and Postfix. Thus multiple configuration files for the same device can be stored in one directory.

In addition, when the field "Check New Firmware only when F/W pre/suffix changes" is set to "Yes", the

device will only issue firmware upgrade request if there are changes in the firmware Prefix or Postfix.

When "Automatic Upgrade" is set "Yes, every" the auto check will be done in the minute specified in this

field. If set to "daily at hour (0-23)", Service Provider can use P193 (Auto Check Interval) to have the

P a g e

HT502 User Manual

Table of Contents