Table 11: Account Settings - Grandstream Networks HT502 User Manual

Send SIP Log If Syslog is enabled and Send SIP Log is set to YES, then SIP messages will also
be delivered via Syslog. Default is set to NO.
Download Device Allows user to download and save a text file containing all the P values of each
Configuration setting as configured at that point on the unit. (Note: For Security Reasons, all
Passwords won't be Downloaded)
Allows user to download and save a XML file containing all the P values of each
Download Device
XML Configuration setting as configured at that point on the unit. (Note: For Security Reasons, all
Passwords won't be Downloaded)
Upload firmware Allows user to upload firmware file from local directory.
Allows user to upload configuration file from local directory.
Upload
configuration
Profile Active When set to Yes the FXS port is activated.
SIP Server's IP address or Domain name provided by VoIP service provider.
Primary SIP Server
Failover SIP Server's IP address or Domain name in case primary server does
Failover SIP Server
not respond.
Prefer Primary SIP Default is no. If set to yes it will register to Primary Server if registration with
Server Failover server expires
IP address or Domain name of Outbound Proxy, or Media Gateway, or Session
Outbound Proxy
Border Controller. Used by HT502 for firewall or NAT penetration in different
network environments. If symmetric NAT is detected, STUN will not work and
ONLY outbound proxy can correct the problem.

Table 11: Account settings

HT502 User Manual
P a g e | 47