Grandstream Networks HT502 User Manual page 55

Disable Call Waiting Default is No. If set to YES Call Waiting indication information will not be
provided to analog phone connected to this FXS port.
Disable Call-Waiting Default is No. If set to YES Call Waiting caller ID will not be provided to analog
Caller ID phone connected to this FXS port.
Disable Call Waiting Default is No. This is to disable the stutter Call Waiting Tone when a Call Waiting
Tone information arrives. The CWCID information will still be displayed.
Disable Connected Default is No. If set to Yes, Connected Line ID will not be displayed even if
Line ID received.
Disable Reminder Default is No. Do not play the reminder ring when this is set to Yes.
Ring for On-Hold Call
Disable Visual MWI If set to "Yes", the MWI information will not be transferred to the analog phone
connected to the FXS port.
Do Not Escape '#' If set to "Yes", device will use '#' instead of %23 in the send URI.
as %23 in SIP URI
Disable Multiple m Default is No. If set to Yes, device will send only one m line in SDP, regardless
line in SDP how many m field in the incoming SDP.
Ring Timeout Incoming call will stop ringing when not picked up given a specific period of time.
Delayed Call Forward Default value is 20 seconds. In case this feature activated using * codes (*92
Wait Time code), the call will be forwarded after this preconfigured amount of time.
No Key Entry Default is 4 seconds. Dialing process is completed and outgoing call is initiated
if no key entry occurs during this preconfigured interval.
Timeout
Early Dial Default is No. Use only if proxy supports 484 response.
controls whether the phone will send an early INVITE each time a key is pressed
when a user dials a number. If set to "Yes", an INVITE is sent using the dial-
number collected thus far; Otherwise, no INVITE is sent until the "(Re-)Dial"
button is pressed or after about 5 seconds have elapsed if the user forgets to
press the "Re-Dial" button.
HT502 User Manual
This parameter
P a g e | 54